PipPosition
Sample Distribution Charts
Color Distribution
Material Distribution
Origin Distribution
| Photo | Generation | Molds | BottomStyle | InsideLogoOrientation | InsideLogoStyle | InsideRibStyle | MoldIdentificationLayout | MoldPositionLayout | MoldPositionStyle | PatPendLayout | PatPendStyle | StudLogoStyle | StudRecessStyle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
01 - Automatic Binding Bricks | 2 | None | None | None | Lengthwise | None | None | None | None | None | None | None |
 |
02 - Large logo - lengthwise ribs | 1 | None | Left To Right | Bold Blockletters | Lengthwise | None | None | None | None | None | None | None |
 |
03 - Large logo - ribs across | 2 | None | Left To Right | Blockletters | Across | None | None | None | None | None | None | None |
 |
04 - Dogbone | 5 | None | Top To Bottom | Dogbone | None | None | Left (Bottom To Top) | Typed | None | None | None | None |
 |
11 - Tubeless - No logo inside - corner pip | 19 | Cross-support | None | None | Mixed | None | Right (Bottom To Top) | Typed | None | None | Wide Straight 'O' | Large sloped (3mm) |
| 21 - Old logo - 3mm stud recess - corner-pip | 5 | Tubes Without Cross-support | None | None | None | None | Left (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Large (3mm) | |
| 23 - Old logo - smaller stud recess - corner-pip - no mold-id | 4 | Tubes Without Cross-support | None | None | None | None | Left (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | |
 |
24 - Tall wide straight 'O' - corner pip - smaller stud recess | 1 | Tubes With Cross-support | None | None | None | None | Right (Top To Bottom) | Typed | Right | Normal | Tall Wide Straight 'O' | Small (2-2,2mm) |
| 32 - Old logo - 2x2 with mold identifiers | 6 | Tubes Without Cross-support | None | None | None | Right (Top To Bottom) | Left (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | |
| 33 - Old logo - 2x3 with mold identifiers | 6 | Tubes Without Cross-support | None | None | None | Right (Top To Bottom) | Left (Bottom To Top) | Typed | Top+Bottom (right-aligned) | Normal | Wide Round 'O' | Small (2-2,2mm) | |
| 34 - Old logo - 2x4 with mold identifiers | 6 | Tubes Without Cross-support | None | None | None | Right (Top To Bottom) | Left (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | |
 |
42 - Narrow Straight 'O' 1x8 with mold identifiers | 2 | Cross-support | None | None | None | Right (Top To Bottom) | Left (Bottom To Top) | Typed | None | None | Narrow Straight 'O' | Small (2-2,2mm) |
| 45 - Other parts - modern logo | 1 | None | None | None | None | None | None | None | None | None | Modern | Medium (2,3-2,5mm) |
01 - Automatic Binding Bricks (1949-1951)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
01a | Automatic Binding Bricks | 7 / 16 | 01b (Matching pattern - extra slot added) |
 |
01b | Automatic Binding Bricks (early version) | 1 / 1 | 01a (Matching pattern - extra slot added) |
02 - Large logo - lengthwise ribs (1952-1952)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
02a | Large logo - lengthwise ribs | 5 / 16 |
03 - Large logo - ribs across (1953-1953)
| Photo | CatId | Mold | Members | MoldPositionLayout | MoldPositionStyle | Associations |
|---|---|---|---|---|---|---|
 |
03a | Hatched bricks | 6 / 18 | None | None | 03b (Matching surface pattern),03c (Matching stud-ring pattern (d-1 rotated 180 deg.)) |
 |
03b | Numbered bricks | 6 / 18 | Top | Hand-written | 03a (Matching surface pattern),03c (Matching stud-ring pattern (d-1 rotated 180 deg.)) |
04 - Dogbone (1954-1954)
| Photo | CatId | Mold | Members | InsideLogoOrientation | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | Associations |
|---|---|---|---|---|---|---|---|---|
 |
04a | Overlapping numbers | 3 / 16 | Top To Bottom | None | Left (Bottom To Top) | Typed | |
 |
04b | Non-overlapping numbers | 6 / 13 | Left To Right | None | Left (Bottom To Top) | Typed | |
 |
04e | Circles 4x4 Slotted | 2 / 6 | Diagonal | Across | None | None | 04f (Matching top+bottom) |
 |
04f | Circles 4x4 Slots removed | 2 / 6 | Diagonal | Across | None | None | 04e (Matching top+bottom) |
 |
04g | 1x6+1x8 Without cross-support | 2 / 4 | Left To Right | None | Left (Top To Bottom) | Typed |
11 - Tubeless - No logo inside - corner pip (1956-1957)
| Photo | CatId | Mold | Members | BottomStyle | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|
 |
11c | Unnumbered - sloped stud recesses | 4 / 22 | None | Across | None | None | Large sloped (3mm) | |
 |
11d | 2x4 Centered and mirrored numbers - corner-pip | 10 / 20 | None | Across | Center (Bottom To Top) | Typed | Large (3mm) | |
 |
11f | 2x4 Sloped stud recesses | 10 / 20 | None | Across | Left (Bottom To Top) | Typed | Large sloped (3mm) | |
 |
11g | 2x4 Normal stud recesses | 10 / 20 | None | Across | Left (Bottom To Top) | Typed | Large (3mm) | |
 |
11h | 2x3 Sloped stud recesses | 13 / 21 | None | Across | Left (Bottom To Top) | Typed | Large sloped (3mm) | |
 |
11i | 2x3 Normal stud recesses | 8 / 18 | None | None | Left (Bottom To Top) | Typed | Large (3mm) | |
 |
11j | 2x2 Sloped stud recesses - handwritten numbers | 20 / 28 | None | Across | Center (Bottom To Top) | Hand-written | Large sloped (3mm) | 11k (Matching surface pattern),11l (Matching surface pattern) |
 |
11k | 2x2 Sloped stud recesses - typed weak numbers | 9 / 28 | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11j (Matching surface pattern),11l (Matching surface pattern) |
 |
11l | 2x2 Sloped stud recesses - typed strong numbers | 10 / 28 | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11j (Matching surface pattern),11k (Matching surface pattern) |
 |
11m | 2x2 Normal stud recesses | 12 / 28 | None | None | Center (Bottom To Top) | Typed | Large (3mm) | |
 |
11n | 2x8 + 2x10 single pip - sloped stud recesses | 3 / 8 | Cross-support | Mixed | Right (Bottom To Top) | Typed | Large sloped (3mm) | |
 |
11o | 2x8 + 2x10 single pip - normal stud recesses | 3 / 8 | Cross-support | Mixed | Right (Bottom To Top) | Typed | Large (3mm) | |
 |
11q | 1x2 Sloped stud-recesses | 7 / 28 | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11r (Matching surface pattern),11s (Matching surface pattern) |
 |
11r | 1x2 Sloped+Normal stud-recess | 7 / 28 | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11q (Matching surface pattern),11s (Matching surface pattern) |
 |
11s | 1x2 Normal stud-recess | 7 / 28 | None | Across | Center (Bottom To Top) | Typed | Large (3mm) | 11q (Matching surface pattern),11r (Matching surface pattern) |
 |
11t | 1x2 Sloped stud-recesses sideways numbers | 13 / 28 | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | |
 |
11u | 2x4 Without ribs - single pip, bolder stud font | 13 / 20 | None | None | None | None | Large (3mm) | |
 |
11w | 2x4 Unnumbered - normal recess | 1 / 5 | None | Across | None | None | Large (3mm) | |
 |
11z | 2x4 Without ribs - single pip, normal stud font | 9 / 14 | None | None | None | None | Large (3mm) |
21 - Old logo - 3mm stud recess - corner-pip (1958-1959)
| Photo | CatId | Mold | Members | BottomStyle | MoldPositionLayout | Associations |
|---|---|---|---|---|---|---|
| 21aa | 4x4 Cornered | 4 / 8 | Tubes With Cross-support | Right (Top To Bottom) | ||
| 21b | 2x4 - Mold number left - pip left | 3 / 18 | Tubes Without Cross-support | Left (Bottom To Top) | ||
| 21o | 2x3 - Pip left - mold 1 (round tube edge) | 7 / 16 | Tubes Without Cross-support | Right (Top To Bottom) | 21p (Matching bottom pattern) | |
| 21p | 2x3 - Pip left - mold 2 (sharp tube edge) | 7 / 16 | Tubes Without Cross-support | Right (Top To Bottom) | 21o (Matching bottom pattern) | |
| 21s | 2x2 - Pos. left of tube | 3 / 6 | Tubes Without Cross-support | Left (Bottom To Top) |
23 - Old logo - smaller stud recess - corner-pip - no mold-id (1958-1959)
| Photo | CatId | Mold | Members | MoldPositionLayout | MoldPositionStyle | PatPendLayout | PatPendStyle | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|
| 23c | 2x4 - mold id left top to bottom | 16 / 20 | Left (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
| 23d | 2x4 - mold id left bottom to top #1 | 14 / 20 | Left (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
| 23s | 2x2 and 2x3 - without pat.pend/mold-id | 1 / 8 | None | None | None | None | Wide Straight 'O' | ||
| 23y | 2x3 Mirrored handwritten mold pos | 1 / 24 | Right (Top To Bottom) | Hand-written | None | None | Wide Round 'O' |
24 - Tall wide straight 'O' - corner pip - smaller stud recess (1958-1959)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
| 24a | 4x4 corner brick | 4 / 8 |
32 - Old logo - 2x2 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldIdentificationLayout | MoldPositionLayout | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|
| 32a | 2x2 - A-mold | 31 / 32 | Right (Top To Bottom) | Left (Top To Bottom) | Wide Straight 'O' | ||
| 32c2 | 2x2 - C-mold 2 - Small mold-id right | 4 / 28 | Right (Top To Bottom) | Left (Bottom To Top) | Wide Straight 'O' | ||
| 32f | 2x2 - F-mold | 1 / 2 | Right (Top To Bottom) | Left (Bottom To Top) | Wide Round 'O' | ||
| 32j | 2x2 - J-mold | 12 / 32 | Right (Bottom To Top) | Left (Bottom To Top) | Wide Round 'O' | ||
| 32k | 2x2 - K-mold | 23 / 34 | Right (Bottom To Top) | Left (Bottom To Top) | Wide Round 'O' | ||
| 32l | 2x2 - L-mold | 26 / 36 | Right (Bottom To Top) | Left (Bottom To Top) | Wide Round 'O' | 32l2 (Matching pattern - rotated 180 deg) |
33 - Old logo - 2x3 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldPositionLayout | MoldPositionStyle | Associations |
|---|---|---|---|---|---|---|
| 33d1 | 2x3 - D-mold 1 (Plain) | 15 / 24 | Left (Bottom To Top) | Typed | 33d2 (Matching pattern - rotated 180 deg) | |
| 33d2 | 2x3 - D-mold 2 (Rotated stud-logo) | 21 / 24 | Left (Bottom To Top) | Typed | 33d1 (Matching pattern - rotated 180 deg) | |
| 33e | 2x3 - E-mold | 1 / 2 | Left (Bottom To Top) | Typed | ||
| 33g | 2x3 - G-mold | 16 / 22 | Left (Top To Bottom) | Typed | ||
| 33h1 | 2x3 - H-mold (Plain) | 16 / 22 | Left (Bottom To Top) | Typed | ||
| 33h2 | 2x3 - H-mold (Hand-written) | 1 / 1 | Left (Bottom To Top) | Hand-written |
34 - Old logo - 2x4 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldIdentificationLayout | MoldPositionLayout | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|
| 34a1 | 2x4 - A-mold 1 - Mold identifier right | 11 / 20 | Right (Top To Bottom) | Left (Top To Bottom) | Wide Straight 'O' | ||
| 34b | 2x4 - B-mold | 5 / 20 | Right (Top To Bottom) | Left (Top To Bottom) | Wide Straight 'O' | ||
| 34f2 | 2x4 - F-mold 2 - Mold identifier right | 16 / 20 | Right (Top To Bottom) | Left (Bottom To Top) | Wide Straight 'O' | ||
| 34h1 | 2x4 - H-mold 1 | 10 / 20 | Right (Top To Bottom) | Left (Bottom To Top) | Wide Straight 'O' | 34h2 (Matching pattern - rotated 180 deg) | |
| 34u | 2x4 - U-mold | 1 / 20 | Left (Bottom To Top) with exception(s) | Right (Bottom To Top) with exception(s) | Wide Round 'O' | ||
| 34v1 | 2x4 - V-mold 1 | 7 / 22 | Right (Bottom To Top) | Left (Bottom To Top) | Wide Round 'O' |
42 - Narrow Straight 'O' 1x8 with mold identifiers (1958-1970)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
42b | 1x8 Cross support Small hole B-mold | 7 / 12 | |
 |
42c1 | 1x8 Cross support Small hole C-mold Cornered pip | 2 / 10 |
45 - Other parts - modern logo (1960-1990)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
45B | Samsonite waffle plates - modern logo | 2 / 5 |
| Generations | Molds | MoldMembers |
|---|---|---|
| 13 | 60 | 497 |
Color
Angle
Motive
